Product Description:
Foot Replacement for Sony Sony FE 200-600mm f/5.6-6.3 G OSS Lens with QD Socket. Lens Foot incorporate Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. Attach your favorite strap to the clamp, then mount the clamp to any of Arca Type plates , L brackets or Foot Replacements. Straps are available at eBay, Amazon, Cabala's, Bass Pro and other stores with sporting fishing and military equipment. My favorite strap is Black Rapid. Installation Instruction:
1)Slide the SFR003 Lens Foot onto the lens and attach it to a
lens using the enclosed 1/4-20 screw. 2. Drive the screw in until you first
meet resistance, then turn it about 30° farther to establish appropriate, but
not excessive torque. Do not over tighten. 3. Tighten the side set screw, then
turn it about 30° farther to establish appropriate, but not excessive torque.
Do not over tighten.
- 5.50 inches long
- Weight 4.2 oz (119 g)
- 1/4-20 tapped hole
- Quick Detach ( QD ) Socket build in.
- Double-dovetail design allows for dual clamping surfaces on rail
- Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
- Precision C.N.C. machined from 6061-T6 Aluminium
- Made in USA
- Stainless steel hardware
- Black hard coat anodized surface
One replacement foot
Two M3 safety screws attached to foot
Hex wrenche for M3 screws and mountng screw
|
Lightweight and Perfect Fit 
