Product Description:
Lens support package with quick height adjustment includes a 8 inch rail, lens support bracket, 1.00 inch clamp (F60b) and dual side clamp ( F51) .The clamp is mounted to the rail end with a single screw and to prevent twisting dowel pin. The lens supporting bracket is mounted inside the clamp for quick height adjustment. This setup can dramatically improve the stability of your camera/lens combo. To use this set you will need Arca Swiss type plate mounted to original lens collar or replacement collar with Arca Swiss mount build in.

• One captive style slot
• Double-dovetail design allows for dual clamping surfaces
• Can be used with various lenses
• Made from 6061-T6 Aluminium
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Rail Specifications:

• 8.00 inches long
• 1.50 inches wide
• 1/2 inch thick
• 1/4-20 tapped hole in front for lens support or other accessories
• Double-dovetail design allows for dual clamping surfaces
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Clamp Specifications:

• 1.00 inches long
• Socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8"-16
• Clamp knob is captive. Knob stops at maximum opening - cannot be lost in the field
• Precision C.N.C. machined from 6061-T6 Aluminum
• Black hard coat anodized surface
• Made in USA

Dual Side Clamp Specifications:

• 2.375 inches long
• Socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8"-16
• Clamp knob is captive. Knob stops at maximum opening - cannot be lost in the field
• Precision C.N.C. machined from 6061-T6 Aluminum
• Black hard coat anodized surface
• Made in USA

One lens support bracket
One 8 inch rail
One 1.00 inch clamp with mounting screw and anti twist dowel pin
One dual side clamp
One 1/4-20 - 3/4 flat head screw for clamp mount
One Dowel pin
Two M3 screws attached to 8.00 inch rail
Hex wrenches for 1/4-20 and M3 screws