Product Description:
3.25 inch (82mm) clamp for Manfrotto 468MG hydro-static head. Clamp is assembled with a pin that is press fitted (will not fall out). To mount the clamp onto the ball head simply place the clamp on top of the ball head making sure to align the pin with the hole on the ball head post. Attach the clamp using the original screw.
- 3.25 inches long
- Weight: 4/7 oz (135g)
- Center socket is countersunk on top but also threaded 3/8-16
- Two outside holes are tapped 1/4-20 and 45 mm apart from each other
- 2.6mm deep relief grooves guarantee compatibility with most plates/rails
- Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stops.
- Knob is captive. Knob stops at maximum opening - cannot be lost in the field
- Back side is equipped with pin to match small hole on Manfrotto ball head. It preventing clamp from twisting.
- Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
- Precision C.N.C. machined from 6061-T6 Aluminium
- Stainless steel hardware
- Black hard coat anodized surface
- Made in USA
One 3.25 inch clamp
Hex wrenches for original small screw and center screw
|
Perfect Fit 
