Product Description:
Manfrotto 410 extended conversion plate with F63 clamp.
This is the extended version of the plate. Clamp center is located on Manfrotto 410 camera/lens mount axis and it is the same as the head panning base. When the head is panned both the head and camera/lens rotate around the same axis. For distant subjects original Manfrotto arrangement for this gear head is just an inconvenience. For critical panoramic or most especially macro work this is a killer and makes the 410 useless. Using this extended adapter plate/clamp combination you can enjoy your pano and macro photography again. The clamp can be positioned in relation to adapter plate in 90 degree increments. It cannot be oriented with knot on bubble level side. The clamp can be mounted to adapter plate either with two or three screws, depending on clamp orientation.
*If you would like the clamp to have a different knob (long black, short black, or short silver) please state so in the comment box when checking out.*
Adapter plate is attached to Manfrotto geared head in two simple steps:
- Remove lock down level with provided 3 mm hex wrench
- Connect plate to geared head using one 1/4-20 screw and one 10-32 screw
Plate Specifications: - 4.45 inches long
- 2.56 inches wide
- 5/8 inches thick
- Built-in bubble level
- One 1/4-20 tapped hole
- Seven 10-32 tapped holes placed around the 1/4-20 hold in 90 degree increments
- Hole to hole mounting distance between 10-32 holes is 30 mm or 45 mm
- Precision C.N.C. machined from 6061-T6 Aluminium
- Black hard coat anodized surface
- Made in USA
Clamp Specifications:
- 3.25 inch long
- Weight 4.7 oz (135g)
- Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud.
- Precision C.N.C. machined from 6061-T6 Aluminium
- Compatible with Kirk, R.R.S.and many other Arca style Quick release plates.
- Stainless steel hardware.
- Black hard coat anodized surface
- Made in USA
- *If you would like the clamp to have a different knob (long black, short black, or short silver) please state so in the comment box when checking out.*
One adapter plate
One F63 clamp
Two 1/4-20 - 3/4 screw
Three 10-32 screws
Hex wrenches for 1/4-20 screw, 10-32 screws, and original level screw
|
Good but has a few problems. 
Pefect solution for unifying my gear