Product Description:
Manfrotto 405 conversion plate. Panning clamp with 2.18 inch (55 mm) hole center to hole center mount required. You will need a panning clamp to use this plate with your gear head. Benro (PC1) and RRS will work just fine
Adapter plate is attached to Manfrotto geared head in two simple steps:
- Remove lock down level with provided 3 mm hex wrench
- Connect plate to geared head using one 1/4-20 screw and one 10-32 screw
- 3.56 inches long
- 2.56 inches wide
- 5/8 inches thick
- Built-in bubble level
- One 1/4-20 tapped hole
- Eight 10-32 tapped holes placed around the 1/4-20 hold in 90 degree increments
- Hole to hole mounting distance between 10-32 holes is 30 mm or 45 mm
- Precision C.N.C. machined from 6061-T6 Aluminium
- Black hard coat anodized surface
- Made in USA
One adapter plate
One 1/4-20 - 3/4 screw
One 10-32 screws
Hex wrenches for 1/4-20 screw, 10-32 screws, and original level screw
Two M6 screws for panning clamp mount
|
Excellent Quality and perfect fit 
