Product Description:
3.25 inch rail with removable ridge. Removable ridge can be mounted in various locations. Double-dovetail design allows for dual clamping surfaces on rail.
3.25 inches (82.5mm) long
1.50 inches wide
3/8 inches thick plust 5/16 flange heightOne captive style slotTwo front holes for accessoriesTwo safety stops. This prevents free fall when the clamp is not full closed. (M3 Screws)The captive style screw will be about 0.3 inches above plate surface. If you are planning on using a plate with a blind hole, please check the depth of it. You may need a shorter screw.Double-dovetail design allows for dual clamping surfaces on rail.Used with various lensesPrecision C.N.C. machined from 6061-T6 AluminiumBlack hard coat anodized surface.Stainless steel hardware.Made in USA
One 3.25 inch plate
One 1/4-20 - 1/2 captive style screw
One removable flange with two mounting screws
Two M3 stop screws attached to plate
Hex wrenches for 1/4-20 and M3 screws
|
Excellent quality. 
