Product Description:
10 inch lens support package with quick height adjustment includes a 10 inch rail (G010-10), 3" modular lens support bracket (LLSB_MOD2), 1.50 inch clamp (F61b), and dual sided clamp (F51). The F61b clamp mounts to the end of the rail with a single screw. The lens supporting bracket it mounted inside the clamp for quick height adjustments when you are using multiple lenses with your camera. The dual sided clamp is very handy for quick lens foot mounts and dismounts. This setup can dramatically improve the stability of your camera/lens combo.

• One captive style slot
• Double-dovetail design allows for dual clamping surfaces
• Can be used with various lenses
• Weight 3.2 oz (90g)

Rail Specifications:

• 10.00 inches long
• 1.50 inches wide
• 1/2 inch thick
• Weight: 4.6 oz (131g)
• Engraved metric scale
• 1/4-20 tapped hole in front for lens support or other accessories
• Three captive style slots
• Double-dovetail design allows for dual clamping surfaces
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)

Clamp (F61b) Specifications:

• 1.50 inches long
• Weight: 3.0 oz (84g)
• Socket it countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8"-16
• Clamp knob is captive. Knob stops at maximum opening - cannot be lost in the field

Dual-Sided Clamp (F51) Specifications:

• 2.375 inches long
• Weight: 5.0 oz (143g)
• Two safety stop relief grooves on each side. This precents free fall when the clamp is not fully closed and your plate has safety stops
• Clamp knob is captive. Knob stops at maximum opening - cannot be lost in the field

All Parts:

• Precision C.N.C. machined from 6061-T6 Aluminium
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

One lens support bracket
One 10 inch rail
One 1.50 inch clamp with mounting screw
One Dual-Sided 2.375 inch clamp
Three 1/4-20 - 1/2 captive style screws
Two M3 screws attached to rail
Hex wrenches for 1/4-20 and M3 screws