Product Description:
Lens support package with quick height adjustment includes a rail, lens support bracket, and 1.00 inch clamp (F60b).The clamp is mounted to the rail end with a single screw and anti twist pin. The lens supporting bracket is mounted inside the clamp for quick height adjustment. This setup can dramatically improve the stability of your camera/lens combo. Lens hood can be reversed for storage after removing supporting bracket from clamp.

• One captive style slot
• Double-dovetail design allows for dual clamping surfaces
• Can be used with various lenses
• Made from 6061-T6 Aluminium
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Rail Specifications:

• 4.1 inches long
• 1.780 inches wide
• 1/2 inch thick
• 1/4-20 tapped hole in front for lens support or other accessories
• One captive style slots
• Two safety stops. This prevents free fall when the clamp is not fully closed (M3 screws)
• Precision C.N.C. machined from 6061-T6 Aluminium
• Made in USA
• Stainless steel hardware
• Black hard coat anodized surface

Clamp Specifications:

• 1.00 inches long
• Socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8"-16
• Clamp knob is captive. Knob stops at maximum opening - cannot be lost in the field
• Precision C.N.C. machined from 6061-T6 Aluminum
• Black hard coat anodized surface
• Made in USA

One lens support bracket
One 4.1 inch rail
One 1.00 inch clamp with mounting screw
One 1/4-20 - 1/2 captive style screws
One 1/4-20 - 3/4 flat head screw for clamp mount
One Dowel Pin
Two M3 screws attached to rail
Hex wrenches for 1/4-20 and M3 screws