Plate for Manfrotto 410 Gear Head


Manfrotto 410 conversion plate only. You need a clamp to use this plate with gear head and plates. Clamp can be positioned in relation to adapter plate in 90 degree increments to make it convenient for everybody, or what you are used to. Please check mounting hole location before placing order. See drawings and pictures for references.

**Please Note** This item includes only the M410 converstion plate and no clamp. If you purchase this item and then later wish to order a clamp, you will have to pay FULL PRICE for the clamp. If you need a clamp please make sure to order the package of M410 with F63 clamp to save yourself some money. Thank You
  • 3.56 inch long
  • 2.56 wide
  • 5/8 thick
  • One hole tapped 1/4-20
  • Eight holes tapped 10-32 and placed around 1/4 hole in 90 degree increment.
  • Hole to hole mounting hole distance between 10-32 holes is 30mm or 45mm
  • Made from 6061-T6 Aluminum
  • Made in USA

  • Adapter plate is attached to Manfrotto geared head in two simple steps:
    1)Remove lock down level with provided 3mm hex key.
    2)Connect plate to geared head using one 1/4-20 screw and one 10-32 screw.

    Detailed Instructions

  • One adapter plate
  • Two 1/4-20 x 3/4 screws
  • Three 10-32 screws
  • Hex key for -20 screw 10-32 screw and original level screw

  • Add to Cart:

    • Model: M410 Plate Only
    • Shipping Weight: 0.5lbs
    • 27 Units in Stock
    • Manufactured by: Hejnar Photo

    Additional images for

    This product was added to our catalog on Tuesday 02 August, 2011.

    Your IP Address is:
    Copyright © 2014 Hejnar Photo Store. Powered by Zen CartZen Cart templates